Smoke stop is a fluid-like substance specifically made to help reduce exhaust smoke and also quiet noisy engines. Smoke stop can be mixed with oil and also increases viscosity. When you don't treat the exhaust from smoking you are risking the safety of both the car's and yours.
Functions of a smoke stop
- Smoke stops quiet noisy engines.
- Smoke stop increases oil viscosity.
- It also helps to reduce the main problem which is smoking exhaust.
- It improves performance in oil burning engines.
Directions for use
Add the entire contents to the crankcase of an unengaged engine. The crankcase should not be overfilled, so much care must be taken when adding the contents.
Cautions
- Make sure you have your protective wear on.
- Avoid prolonged contact with skin.
- Seek medical attention immediately if ingested or affected in any way.
- Flush with water if it reaches your eyes.
- Keep away from children.
2.Grinding Paste
Grind paste is particularly and specially formulated for grinding automotive valves. The grinding paste is in two (2) forms which are the fine end and the coarse end.
Directions for usage
Apply compound to valve face and the seat, after grinding it in the usual manner. Precautions must be taken so that the paste does not fall into the cylinder head.
Cautions
- Skin irritant.
- Hands should be washed properly after handling the grinding paste.
- It should be kept out of reach by children.
3.Head Gasket Shellac
This is also a fluid-like substance specially made to prevent leakages at the threaded connections. The head casket shellac is used on seals and repairs paper, cardboard, metal and rubber gaskets. The gasket shellac dries slowly but sets to become very hard. Main use of the head gasket shellac is used to prevent leakages at threaded connections.
Directions for use
Apply thin, even coat of the head gasket shellac to gaskets and other surfaces. Then after, leave for few minutes to dry and assemble parts. Don't expect it to dry fast, remember that it dries slowly to harden well.
Precautions
- Causes eye and skin irritation.
- Can cause drowsiness or dizziness.
- Ver harmful to the body if ingested.
How the head gasket shellac must be stored
- It should be kept in a well-ventilated area.
- Must be kept cool.
- Containers must be tightly closed when not in use.
- It should be kept away from children if you want your kids to be safe.
4.Stop Leak
A stop leak is used to block any open passage in a radiator. It is in a powdery state. Its main function is to block or stop leakages in a radiator.
Directions for use
The radiator should be filled to a proper level and also free of scale with engine kept warm and running, pour stop leak into the radiator. Replace the radiator cap and run engine at fast idle with the heater on for few minutes. After the leak will be sealed.
Cautions
Remember not to ingest the stop leak into the body and make sure is kept away from your kids.
0 Comments